Data transfer points, Selecting points to transfer, Data transfer points selecting points to transfer – Rockwell Automation FactoryTalk Historian ME 2.2 Quick Start Guide User Manual
Page 42
F
ACTORY
T
ALK
H
ISTORIAN
ME Q
UICK
S
TART
G
UIDE
38
•
• •
Transfer Statistics section of the Data Transfer page contains the
following information:
Data Transfer Points
After you have set up the connection to the FactoryTalk Historian
SE or PI server, you must specify which points you want to transfer.
The Data Transfer Points page allows you to search for points in
the FactoryTalk Historian ME database and assign them for transfer
to the selected FactoryTalk Historian SE or PI server.
To open the Data Transfer Points page, click on Configure
Historian in the top navigation bar, and then click on Data Transfer
Points in the left-hand navigation bar.
Selecting Points to Transfer
Follow these steps to select points to transfer:
1.
Enter search criteria in the data fields using the following
information:
Property Name
Property Description
Transfer Rate
This is the total number of retrieved events
sent to FactoryTalk Historian SE or the PI
server, divided by the time spent retrieving
events sent to FactoryTalk Historian SE or
the PI server (in events per minute).
Successful Attempt
Rate
This is the number of successful data
transfers from FactoryTalk Historian ME
to FactoryTalk Historian SE or the PI
server per hour.
Property Name
Property Description
Point Name
Enter a point name or use an asterisk (*) to
search data with all point names.