Rockwell Automation FactoryTalk Historian ME 2.2 Quick Start Guide - Manual (Page 44)

F
ACTORY
T
ALK
H
ISTORIAN
ME Q
UICK
S
TART
G
UIDE
40
•
• •
Note: It takes approximately fifteen minutes to update the FactoryTalk
Historian SE or PI server, so the “FTMS” Points Available (FactoryTalk
Historian SE)/Available License Points value may not update immediately.
The following FactoryTalk Historian ME Information is displayed:
In addition to information about the FactoryTalk Historian SE or PI
server and FactoryTalk Historian ME information, the file
information for the searched data points is displayed in table
format. The table lists all data points that fit the search criteria. If
the point has been created in the FactoryTalk Historian SE or PI
server, then this is indicated in the table. All “checked” points are
tagged for transfer to the FactoryTalk Historian SE or PI server.
“FTMS” Points
Available
(FactoryTalk
Historian SE)/
Available License
Points (PI server) This represents the total number of points
granted by the license minus the number of
points that are already being transferred to
the FactoryTalk Historian SE or PI server.
Property Name Property Description
Point Selected This represents the total number of points
already created in the FactoryTalk
Historian SE or PI server.
Auto Transfer
Mode This displays whether Auto Transfer is on
or off. If Auto Transfer is “On”, then
FactoryTalk Historian ME is set to
automatically transfer data based on the
settings on the Data Transfer page.
Newly Added
Points This represents the total number of points
recently selected for transfer to
FactoryTalk Historian SE or a PI server.
Property Name Property Description