Rockwell Automation FactoryTalk Historian ME 2.2 Quick Start Guide - Manual (Page 33)

T
RANSFERRING
D
ATA
29
•
• •
12. Click [Finish]. The trust displays in the list of trusts as shown
in the following image.
13. Repeat steps 3-12 to create a webs trust. Replace datatransfer
with webs and add the appropriate information.
14. Select File > Exit from the drop-down menu to exit the SMT
application.
If you are configuring Data Transfer in the FactoryTalk Historian
ME web interface next, you must ensure that your FactoryTalk
Historian SE is configured for Data Transfer. For example, the
FactoryTalk Activation licenses that support the FTMS point source
should be installed for the FactoryTalk Historian SE server within
the FactoryTalk Administration Console. The FactoryTalk
Historian SE patch enables the FTMS point source support.
See “Installing FactoryTalk View SE Patch” in the FactoryTalk
Historian ME 2.2 User Guide for more information about the patch
that enables FTMS point source support.