Rockwell Automation FactoryTalk Historian ME 2.2 Quick Start Guide - Manual (Page 11)

I
NSTALLING
F
ACTORY
T
ALK
H
ISTORIAN
ME C
OMPONENTS
7
•
• •
Installing FactoryTalk Historian ME
Components
If you plan to use FactoryTalk Historian ME Client Tools, such as
the FactoryTalk Historian ME Rule Editor, FactoryTalk Directory,
and/or FactoryTalk Security, then these components must be
installed before you continue. If you do not plan to use FactoryTalk
Historian Client Tools, then skip to “Logging into FactoryTalk
Historian ME” on page 11.
After you have selected the platform that best suits your needs and
have installed the FactoryTalk Historian ME Module into the
chassis, you must determine the configuration environment for the
FactoryTalk Historian ME components. These components, or
FactoryTalk Historian Client Tools, can be found on the CD that
was shipped with the FactoryTalk Historian ME Module.
Insert the CD into your computer’s CD drive. If autoplay is turned
on, the FactoryTalk Historian ME installation screen will
automatically launch and display the FactoryTalk Historian ME
installation options. If the screen does not automatically launch,
click Start > Run and type D:\setup, where D is the letter of your
CD drive.