Rockwell Automation 1756-SYNCH ControlLogix SynchLink Module User Manual - Manual (Page 96)

Publication 1756-UM521C-EN-P - July 2004
C-2 Configuring the Daisy Chain Configuration
Configure Time Master Chassis - Master Node
You must complete the following tasks to configure the time
master chassis.
• Create a New RSLogix 5000 Project
• Add a SynchLink Module
• Configure the SynchLink Module
– Name the module
– Choose a receive communications format
– Choose a transmit communications format
– Choose an electronic keying option
– Set the RPI
– Determine if the module is the CST Time Master for
the chassis
– Make the module the Time Master for the SynchLink
• Download Configuration
Create a New RSLogix 5000 Project
1. Use the File menu to create a new project.
2. Name the controller.
Time Master Chassis
ControlNet SynchLink
Choose a New project
from the File menu.
A. The controller is a 1756-L1.
B. The controller is named
Time_Master_chassis.
C. The controller is used in a
7-slot chassis.
D. The controller slot number
is 0.
E. Click here to use the
new controller.