Rockwell Automation 1748 DataSite Configured Panel Installation Instructions - Manual (Page 43)

43 Publication 1748-IN001B-EN-P - May 2009
Chapter
7
Renewal Parts
Renewal Parts Stocking
Program A Renewal Parts Stocking Program for your DataSite configured panel is
recommended in conjunction with a maintenance program. This is important
for minimizing expensive downtime and facilitating critical repairs.
The following are factors to consider when developing an effective Renewal
Parts Stocking Program:
1. Frequency of “ON-OFF” cycling,
2. Duration of “ON” or operating time,
3. Need for continuous operation, inherent design limitations,
environmental considerations, and the like,
4. Total number of similar devices supplied as original equipment within
the DataSite configured panel, and
5. Individual user policies governing spare parts.
Consideration should also be given to stocking complete units when the job
site is in an area remote from a distributor or district sales office or when it is
critical to maintain continuous operation of a system.
Order Information The following information is required when ordering renewal parts:
• Part or catalog number
(1)
• Description of part or unit
• Series letter
(1)
• Serial number
(1)
• Quantity
• Shipping address
(1) Can be found on the nameplate label of your DataSite configured panel.