Rockwell Automation 1732E-IB16M12SOEDR EtherNet/IP ArmorBlock supporting Sequence of Events - Manual (Page 43)

Publication 1732E-UM002A-EN-P - March 2010
Configure the Module Using RSLogix 5000 35
On this dialog, you can:
A. Select the module series.
B. Make sure the Major and Minor
Revision numbers match your
module’s revision.
C. Choose and Electronic Keying
method. For more information, see
page 49 .
D. Select the Connection type.
E. Select the Data Format.
F. Click OK to return to theGeneral tab
of the Module Properties dialog.
From the Connection tab, you can:
A. Change the RPI. For more information
on the RPI, see page 3 .
B. Inhibit the module. For more
information on Module Inhibiting,
see
page 51 .
C. Make sure a Major Fault occurs on
the module’s owner-controller if there
is a connection failure between the
module and the controller.
D. Click the Port Configuration tab to see
the next screen.
E. Click OK to close the Module
Properties dialog and download your
configuration.