Chapter 8 - using the module, Introduction, Overview – Rockwell Automation 1732E-IB16M12SOEDR EtherNet/IP ArmorBlock supporting Sequence of Events User Manual
Page 63: Chapter 8, Using the module, Introduction overview, Chapter
![background image](/manuals/579689/63/background.png)
55
Publication 1732E-UM002A-EN-P - March 2010
Chapter
8
Using the Module
Introduction
This chapter describes how to use the 1732E EtherNet/IP ArmorBlock
Supporting Sequence of Events module. The chapter contains the following
main sections:.
Overview
The module can be configured to timestamp two transitions per input, one in
each direction (OFF to ON and ON to OFF).
When specific points that are Timestamp Capture-enabled transition (for
example., input 1 is configured so that Timestamp Capture is enabled for OFF
to ON transitions and the input turns ON), the module timestamps the
transition with the current system time value on the network. The module
produces data for the owner-controller the RPI after the input filter criteria
have been met and at subsequent RPIs.
Topic
Page
Overview
53
Manage the Data
58
Module Sends Data to the Controller
58
Copy Relevant Input Data to a Separate Data Structure
61
Acknowledge Timestamp Latching Timestamp Data
62
Sort the Data
64
Clear All Data From the Module’s Buffer At Once
65