Rockwell Automation 1732E-IB16M12SOEDR EtherNet/IP ArmorBlock supporting Sequence of Events User Manual

Page 71

Advertising

Publication 1732E-UM002A-EN-P - March 2010

Using the Module 63

Copy Relevant Input Data to a Separate Data Structure

When the module sends input data to the controller, the data is stored in the
controller tags. We recommend you use a COP or CPS instruction to
programmatically copy new timestamp data from the controller tags to a
separate array in the controller’s memory. Later, you can combine timestamp
data from multiple modules and use a Sort routine to determine the order of
events, with relative time reference, that occurred in a specific time period.

The following figure shows when to use the COP instruction. In this example,
the module timestamped a transition on input 1 and is sending input data to
the controller at each RPI. The controller copies input data from the controller
tags to a separate data structure.

Your application determines what input data should be copied from the
controller tags to a separate data structure. Although you can copy all the input
data to another array, typically, only the data from specific tags is copied.

The following figure shows an example of ladder logic in which the controller
only moves OFF to ON timestamp data for inputs 0…3 from the controller
tags to a separate data structure named myarray. The data in the myarray

IMPORTANT

When you copy relevant timestamp data from the controller
tags to a separate data structure, make sure you copy enough
information for each timestamp that you can differentiate
between timestamps for different inputs.

Controller tags

Separate array

4. Controller

copies
relevant
data from
controller
tags to a
separate
array.

1. Input 1 transitions

from OFF to ON.

2. Module timestamps

the transition.

3. Module sends input

data to the controller.

1732E-IB16M12SOEDR

ControlLogix controller

I.Fault

I.EventOverflow

I.OffsetTimeStamp

I.EventNumber

I.Timestamp[16].OffOn[2]

I.Timestamp[16].OnOff[2]

I.Data

I.NewData

I.ShortCircuit

I.OpenWire

I.GrandMasterClockID

I.LocalClockOffset

I.SyncedToMaster