Rockwell Automation 1732E-IB16M12SOEDR EtherNet/IP ArmorBlock supporting Sequence of Events - Manual (Page 80)

Publication 1732E-UM002A-EN-P - March 2010
72 Troubleshoot the Module
• Notification in the Tag Monitor - General module faults are also
reported in the Tag Monitor. Communication faults are reported in the
input tags. OpenWire, ShortCircuit and EventOverflow faults are also
reported in the input tag.
Determining Fault Type
When you are monitoring a module’s configuration properties in
RSLogix 5000 and receive a Communications fault message, the Connection
page lists the type of fault.
For a detailed listing of the possible faults, their causes and suggested
solutions, see Module Faults in the RSLogix 5000 online help.
Refer to the RSLogix 5000 AOP help to troubleshoot using the Module Info
tab, Internet Protocol tab, Port Diagnostics dialog, Time Sync tab, or Network
tab. Access the AOP help by clicking Help on any of these tabs.
RSLogix 5000 software generates 1s in
response to a module communication
fault.
In this example, a communication fault
occurred between the controller and the
module, so the controller automatically
writes 1s for all bits in the word.
The fault type is listed here
Click Help for a detailed
listing of the possible faults,
their causes and suggested
solutions.