Rockwell Automation 4100 ALEC AXIS LINK ENCODER CONVERTER - Manual (Page 11)

Publication 4100-5.3 - June 1999
Preface 3
Contents of this Manual
Related Documentation
The following documents contain additional information concerning
related Allen-Bradley products. To obtain a copy, contact your local
Allen-Bradley office or distributor.
Terminology Knowledge of the following terms are necessary to the understanding
of the ALEC. For additional definitions refer to the Allen-Bradley
Industrial Automation Glossary, (publication number AG-7.1).
Chapter Title Contents
Preface Describes the purpose, background, and scope
of this manual. Also specifies the audience for
whom this manual is intended.
1 Overview Provides a general description of the ALEC, its
features and mechanical specifications.
2 Installation &
Hookup Provides the steps needed to successfully
mount and wire the ALEC to an incremental
encoder and the AxisLink cable.
3 Set-Up Provides the guidelines for setting up and
configuring the ALEC.
4 Fault Indication &
Control Status Provides information on fault and status
indicators and types of faults.
Appendix A Specifications Provides physical, electrical, environmental,
and functional specifications for the ALEC.
Appendix B Upgrading From
ALEC Series C to
ALEC Series D
Provides a summary of changes from series C
to series D. Contains tables for comparing the
differences between the two series.
For Read This Document Document Number
Programming Allen-Bradley motion controller with GML GML Commander User Manual v4.01
GML Commander Reference Manual v4.01
GMLC-5.1
GMLC-5.2
Instructions for installation and set-up for the 1394 GMC
system 1394 Digital, AC, Multi-Axis Motion Control
System User Manual 1394-5.0
Instructions for installation and set-up for the S Class
Compact motion controller IMC S Class Compact Motion Controller
Installation and Set-up Manual 999-122
An article on wire sizes and types for grounding electrical
equipment National Electrical Code Published by the
National Fire
Protection
Association of
Boston, MA.
An article on wire sizes and types for grounding electrical
equipment (European standards). BS-EN 60204 Electrical Equipment of
Machines Published by British
Standards Institute
A complete listing of current Allen-Bradley documentation,
including ordering instructions. Also indicates whether the
documents are available on CD-ROM or in multi-languages Allen-Bradley Publication Index SD499
A glossary of industrial automation terms and abbreviations Allen-Bradley Industrial Automation Glossary AG-7.1