Rockwell Automation 2080-LC10-12DWD Micro810 Programmable Controllers User Manual - Manual (Page 106)

98 Rockwell Automation Publication 2080-UM001D-EN-E - September 2012
Appendix C Quickstarts
The next screen shows the download progress.
7. If you see an error message instead, check to see if the controller is faulted
or in Run mode. If so, clear the fault or switch to Program mode, click OK
and try again.
8. When the flash update is complete, you see a status screen similar to the
following. Click OK to complete the update.