Rockwell Automation 2080-LC10-12DWD Micro810 Programmable Controllers User Manual - Manual (Page 73)

Rockwell Automation Publication 2080-UM001D-EN-E - September 2012 65
Quickstarts Appendix C
3. Click OK. The Confirmation dialog box appears to confirm that the
password has been set successfully.
4. Click OK.
The controller will require the new password to grant access to any new session.
Clear Password
With an authorized session, you can clear the password on a target controller
through the Connected Components Workbench software.
1. On the Device Details toolbar, click Secure button. Select Clear Password.
2. The Clear Password dialog appears. Enter Password.
3. Click OK to clear the password.
The controller will require no password on any new session.