Rockwell Automation 2080-LC10-12DWD Micro810 Programmable Controllers User Manual - Manual (Page 108)

100 Rockwell Automation Publication 2080-UM001D-EN-E - September 2012
Appendix C Quickstarts
4. Click Next to continue.
5. Click Finish after Found New Hardware Wizard completes installation of
the software.
6. Open RSLinx Classic and run RSWho by clicking the icon.
7. The Micro810 controller shows up under the 12PtM810 driver.
8. You can now use ControlFLASH or Connected Components Workbench
to communicate with the Micro810 controller.