Rockwell Automation 2080-LC10-12DWD Micro810 Programmable Controllers User Manual - Manual (Page 67)

Rockwell Automation Publication 2080-UM001D-EN-E - September 2012 59
Quickstarts Appendix C
3. Press the OK button and select Deactivate PWD.
Deactivate Password option is available only if a password has been
previously set.
4. Enter the password you have previously set using the arrow buttons.
– left and right arrows move to the 8-digit entry field
– left and right arrows select digit in password
– up and down arrows set a value between 0 and 9.
The following message appears when the deactivation is successful:
5. Press OK.
You are now granted access to such system functions as smart relay, and Advanced
Settings.
Change Password
1. Press Esc and OK to call up the System menu.
2. Select the menu item SECURITY.
3. Press the OK button and select Change PWD.
Change Password option is available only if a password has been
previously set.