Rockwell Automation 2080-LC10-12DWD Micro810 Programmable Controllers User Manual - Manual (Page 71)

Rockwell Automation Publication 2080-UM001D-EN-E - September 2012 63
Quickstarts Appendix C
4. Click Secure button. Select Set Password.
5. The Set Controller Password dialog appears. Provide password. Confirm
the password by providing it again in the Confirm field.
6. Click OK.
The Confirmation dialog box appears to confirm that the password has
been set successfully.
7. Click OK.
TIP Passwords must have at least eight characters to be valid.