Rockwell Automation 6155R Industrial Non-display Computers - Manual (Page 17)

17 Publication 6155R-UM001G-EN-P - July 2007
Chapter
2
Installation
Chapter Objectives This chapter shows how to install your computer on a machine, wall,
DIN rail, or rack, and how to make computer connections.
Review each mounting type and the product dimensions before
installation.
European Union
Compliance This product meets the European Union Directive requirements when
installed within the European Union or EEA regions and have the CE
mark. A copy of the Declaration of Conformity is available at the
Rockwell Automation website
http://rockwellautomation.com/products/certification.
ATTENTION
This product is intended to operate in an industrial or control
room environment, which utilizes some form of power isolation
from the public low-voltage mains. Some computer
configurations may not comply with the EN 61000-3-2
Harmonic Emissions standard as specified by the EMC
Directive of the European Union. Obtain permission from the
local power authority before connecting any computer
configuration that draws more than 75 Watts of ac power
directly from the public mains.
ATTENTION
To comply with EN 55024 and EN 61000-6-2, the Ethernet port
LAN cable must be less than 30 m (98.42 ft) and used only
indoors, not exit the building at any point. All other I/O cables
must be less than 3 m (9.84 ft) and used only indoors.