Remove the cover, Required tools, Remove the cover of the 200r computer – Rockwell Automation 6155R Industrial Non-display Computers User Manual
Page 36
Advertising
Publication 6155R-UM001G-EN-P - July 2007
36 Replace System Components
Remove the Cover
To install or upgrade computer components, you must first remove
the cover.
Required Tools
You need a #2 Phillips screwdriver.
Remove the Cover of the 200R Computer
Follow these steps to remove the cover of the VersaView 200R
computer.
1. Disconnect power from the computer.
2. Remove the top three screws and two screws on each side.
3. Remove the top plate.
When reattaching the top cover on the 200R computer, torque the
screws to 0.678 Nm (6 lb-in).
SHOCK HAZARD
Failure to follow proper safety precautions could result in
severe electrical shock and or damage to the computer.
Advertising