Rockwell Automation 6155R Industrial Non-display Computers - Manual (Page 38)

Publication 6155R-UM001G-EN-P - July 2007
38 Replace System Components
Install Add-in Cards You can install PCI or ISA add-in cards in the VersaView 700R and
1400R computers.
To locate the cat. nos. for the VersaView approved PCI or ISA add-in
cards, go to the website http://www.ab.com/industrialcomputers.
Required Tools
You need a #2 Phillips screwdriver.
SHOCK HAZARD Failure to follow proper safety precautions could result in
severe electrical shock or damage to the computer.
ATTENTION
Add-in cards are sensitive to ESD and require careful handling.
Hold cards only by the edges. Do not touch connectors,
components, or circuits. After removing a card, place it on a
flat, static-free surface, component side up. Do not slide the
card over any surface.