Rockwell Automation 6155R Industrial Non-display Computers - Manual (Page 47)

Publication 6155R-UM001G-EN-P - July 2007
Replace System Components 47
Load a Memory Card The VersaView 200R computer has a CompactFlash slot for loading
memory cards.
Follow these steps to load a card in the CompactFlash slot of a
VersaView 200R computer.
1. Locate the CompactFlash slot on the front of the computer.
2. Remove the CompactFlash cover by removing the screw on each
side of the cover.
3. Insert the card into the card slot until it is firmly seated.
4. Reattach the CompactFlash cover by using the two screws on
each side.
ATTENTION
Do not force the card into the slot. Forcing the card into the slot
may damage the connector pins.