Rockwell Automation 6155R Industrial Non-display Computers - Manual (Page 41)

Publication 6155R-UM001G-EN-P - July 2007
Replace System Components 41
Replace the Hard Disk
Drive Follow these precautions when working with the hard disk drive:
• Do not touch internal components.
• Always handle the hard disk drive by its metal frame.
• Store the hard disk drive in an anti-static bag when it is not
installed.
• Never remove or install a hard disk drive with the power on.
To locate the catalog number for the approved VersaView 2.5-inch
hard drive, go to the website http://www.ab.com/industrialcomputers.
SHOCK HAZARD
Failure to follow proper safety precautions could result in
severe electrical shock and/or damage to the computer.
ATTENTION
Electrostatic discharge (ESD) can damage the computer and
components. Make sure you work in a static-safe environment
and wear a grounding strap whenever handling circuit boards,
power supply, memory modules, or other internal components.
ATTENTION
Mechanical shock can damage a hard drive. Do not drop or
bump the drive.