Rockwell Automation 6155R Industrial Non-display Computers - Manual (Page 39)

Publication 6155R-UM001G-EN-P - July 2007
Replace System Components 39
Install Add-in Cards in the 700R Computer
Follow these steps to install add-in cards in the VersaView 700R
computer.
1. Disconnect power from the computer.
2. Remove the top cover.
3. Remove the four screws in each hold-down bar.
4. Remove the hold-down bars.
5. Remove the screw and blank orb from the selected slot.
6. Gently, but firmly, install the add-in card into the appropriate
expansion slot and screw in the orb.
7. Replace the two top hold-down bars and four screws in each
bar.
8. Replace the top cover.