Rockwell Automation 6155R Industrial Non-display Computers - Manual (Page 22)

Publication 6155R-UM001G-EN-P - July 2007
22 Installation
Mount the Computer on a Wall
You can mount the VersaView 200R computer on a wall inside a
machine by using mounting brackets. The brackets secure the
computer to the wall.
1. Attach the two mounting brackets to the rear of the computer
by using four of the provided, M3 x 12 mm panhead screws;
torque to 0.678 Nm (6 lb-in).
2. Drill four holes in the wall that correspond to the holes in the
mounting brackets.
Dimensions are in mm (in.).
3. Position the computer against the wall, aligning the holes in the
mounting brackets with the holes in the wall.
4. Insert the remaining screws through the mounting bracket into
the wall and tighten.
For the VersaView 200R computer, use four M3 x 5 mm,
panhead screws.
TIP
Support the computer with a shelf or other means to make
installation at the appropriate height easier.
92
.0
0 [3.
62
]
115
.4
0 [
4.
54]
11
.7 [
4.
61]
192.20 [7.57]
204.20 [8.04]
172.20 [6.78]