Rockwell Automation 6155R Industrial Non-display Computers - Manual (Page 33)

33 Publication 6155R-UM001G-EN-P - July 2007
Chapter
3
Operation
Chapter Objective This chapter covers these topics:
• Operating guidelines
• Starting the system
• Resetting the system
• Universal serial bus (USB) ports
Operating Guidelines Observe these operating guidelines when using your computer:
• If you are using an external monitor, turn the monitor on first.
• Always use the proper power down procedures as required by
your operating system, such as the Shut Down command in the
Microsoft Windows operating system.
• After shutting the system off, do not move the computer, or turn
it back on again, until the computer comes to a complete stop,
which takes about 30 seconds.
SHOCK HAZARD Do not operate the computer with the covers removed. An
electrical shock hazard exists. Removing the covers will disrupt
air flow and may result in overheating. All covers, including the
slot covers, are required to maintain EMI shield.