Rockwell Automation 6155R Industrial Non-display Computers - Manual (Page 29)

Publication 6155R-UM001G-EN-P - July 2007
Installation 29
Connect Power The power connection for the computers varies by model.
• The VersaView 200R computer connects to either a 120/240V ac
or 9…36V dc power source, depending on the model.
• The VersaView 700R and 1400R computers connect to a
120/240V ac power source.
Connect ac Power
Computers with an ac power input use a standard IEC 320 power
cord. The power supply input accepts 120/240V ac and is
autoranging.
Operate the computer in an industrial or control room environment,
which uses some form of power isolation from the public low-voltage
mains.
ATTENTION
• Connect the ac power cord to a power source with an earth ground to
prevent electrical shock. Failure to follow this warning could result in
electrical shock.
• The computer circuit should have its own disconnect. Use an
uninterruptible power source (UPS) to protect against unexpected
power failure or power surges.
• Always shut down the operating system before removing power to
minimize performance degradation and operating system failures.
Power Input
Power Switch
VersaView 200R Computer