Rockwell Automation 6155R Industrial Non-display Computers - Manual (Page 23)

Publication 6155R-UM001G-EN-P - July 2007
Installation 23
Mount the Computer on a DIN Rail
You can mount the VersaView 200R computer on a DIN rail. The DIN
rail bracket mounts to the bottom or back of the computer.
1. Fasten the DIN rail bracket on the bottom or back of the
computer by using four, M3 x 5 mm panhead screws; torque to
0.678 Nm (6 lb-in).
Dimensions are in mm (in.).
2. Mount the computer on a DIN rail and secure it by
hand-tightening the fastener, being careful not to strip the screw.
IMPORTANT
Do not mount the computer on a DIN rail in high shock and
vibration environments.
Rear Mount DIN Rail
Bottom Mount DIN Rail
152.20 [5.99]
74
.58 [2
.94
]
10
.5 [
0.
41]
Bottom Mount DIN Rail Rear Mount DIN Rail
152.20 [5.99]
74
.58 [2
.94
]
10
.5
[0
.41]