Rockwell Automation 2711-KA1_KC1_TA1_TA4_TC1_TC4 PanelView Terminals for DOS/Windows - Manual (Page 18)

Introduction to PanelView 1200 Operator
Terminals
Chapter 1
1-8
an EPROM can be used for application file back-up. The application file
is programmed into the EPROM with a PROM burner. Once
programmed, it cannot be erased or overwritten.
an EEPROM can be used for application file back-up or for extra
application memory
when the EEPROM is used for application back-up, the downloaded
application file is automatically copied to the EEPROM during the
download operation
an EEPROM can also be used to increase the memory available for
application file storage from 64K to 128K. If the EEPROM is used in
this way, it cannot be used as back-up for the application file.
Functional Variations Among Terminal Types
The terminals are configured almost identically with these exceptions:
buttons are set up differently on keypad terminals and touch screen
terminals
certain screen objects are specific to keypad terminals, others to touch
screen terminals. For more information on objects see your
PanelBuilder 1200 Configuration Software for Windows User Manual,
or your PanelBuilder Development Software User Manual.
foreground and background colors can be assigned only for color
PanelView 1200 terminals. Inverse video and intensity settings are
assigned for monochrome terminals
The keypad terminal has:
21 user-definable function keys
a keypad for entering numeric values
up, down, left and right arrow keys
Home, Enter, Select, Cancel, Raise, Lower and Backspace keys
The user-definable function keys on keypad terminals are pre-labeled at the
factory, but you can create key labels (legends) to suit your application.
The replacement key legends slide in from the rear of the faceplate. The
included Legend Kit provides blank card material that can be written on
with most types of markers or paste-on labels.
Keypad Terminals