Rockwell Automation 2711-KA1_KC1_TA1_TA4_TC1_TC4 PanelView Terminals for DOS/Windows - Manual (Page 35)

PanelView 1200 Terminal Functions
Chapter 2
2-6
With the Mode Select Keyswitch set to Configure mode, the terminal
displays the Configuration Mode Menu.
23593
Up
Cursor
Firmware Rev 05.00.00 06/21/93 (050900) 06/21/93 05:36:59 AM
Application File Name: DEMO 10801 Bytes Used, 52175 Bytes Free
CONFIGURATION MODE MENU
"
Down
Cursor
Enter
Internal Version Number
Date Identification
Software Version
Upload / Download
Serial Port
Rack Assignments
Access Codes
Audio Response
Alarm Relay
Preset Operations
Time and Date
Screen Saver
Screen Alignment
Stuck Button Timeout
User EPROM/EEPROM Power-up Test
Pass-Through Download Options
Unit Tests
Important The Configuration Mode Menu for a touch screen terminal also
contains a False Depression Test which is discussed later in this chapter.
Upload/Download
There are two methods of uploading and downloading application files:
using the Upload/Download cable connected to the computer and the
terminal’s RS-232 port
via a Data Highway Plus using the PLC-5’s Pass-Through feature
Uploading and Downloading instructions for application files are provided
in the PanelBuilder Development Software User Manual, the PanelBuilder
1200 Configuration Software for Windows User Manual, and the
PanelView 1200 Transfer Utility User Manual.
If you are using an older version of PanelView 1200 firmware, see your
PanelBuilder software user manual for details on version compatibility.
The Configuration Mode Menu