Rockwell Automation 2711-KA1_KC1_TA1_TA4_TC1_TC4 PanelView Terminals for DOS/Windows - Manual (Page 20)

Introduction to PanelView 1200 Operator
Terminals
Chapter 1
1-10
Special Keys
There are a series of special keys on the keypad terminal:
the arrow keys are used with the Set Bit and Numeric Cursor Points and
the ASCII Input object
Home, Select work with the Set Bit and Numeric Input Cursor Points
Cancel is designed to be used with all numeric keypads, Numeric Input
and Set Bit Cursor Points.
Raise and Lower are used with Numeric Input Cursor Points only.
The three blank keys at the bottom right are reserved for future
development, and are not configurable.
For more details, see your PanelBuilder Development Software User
Manual, or your PanelBuilder 1200 Configuration Software for Windows
User Manual.
Touch screen terminals are simple to use: an operator presses a selection
directly on the screen to carry out the desired task.
Figure 1.2
Touch Screen Terminal
21003
PanelView
Touch Screen Terminals