Rockwell Automation 2711-KA1_KC1_TA1_TA4_TC1_TC4 PanelView Terminals for DOS/Windows - Manual (Page 74)

Chapter
4
4-1
Verifying the PanelView 1200
Terminal Operation
This chapter describes how to verify that your PanelView 1200 terminal is
functioning and communicating correctly. Information is also provided on
how to connect a PLC controller to the terminal.
To test your PanelView 1200 terminal:
1 Set your Mode Select Keyswitch to Configure mode.
2 Choose Unit Tests from the Configuration Mode Menu. The Unit Tests
screen appears.
The following figure shows the Unit Tests screen on a touch screen
terminal. The keypad screen is slightly different.
20205
UNIT TESTS Battery: Good
Previous Diagnostics
Checksum Failed
Memory
Checksum
Degauss
User
RAM
System
RAM
Power Loss During User RAM" Test may Corrupt User RAM
Display
Touch
Panel
Exit
3 Run the tests. Details of the Unit Tests are in Chapter 2, PanelView 1200
Terminal Functions.
Testing the PanelView 1200
Terminal