Rockwell Automation 8520-OM Offline Development System User Manual - Manual (Page 19)

2--5 Installing ODS
Publication 8520--UM051A--EN--P --July 2000
Offline Development Manual (ODS) Software User Manual
Enter selection (1/2/3):
12.Select [ 1 ], [ 2 ], or [ 3 ], depending on the type of computer.
Choose selection [1] if you are using an Allen-Bradley Series
6120, 6121, 6122, or 618X computer.
The installation utility configures ODS to the type of computer
selected. If the installation utility includes any update notices, it
displays the first page under this heading:
mm/dd/yy
PLEASE NOTE THE FOLLOWING ITEMS:
*
*
notice text
*
*
--MORE--
13.Read the first page, then press any key to display the next page.
14.Repeat step 13, displaying all the available pages. Press any key
to continue.
The installation utility displays this message:
If you would like to print the
above message, use the DOS command:
PRINT a:READ.ME
Strike a key when ready . . .
You cannot enter the DOS PRINT command during installation.
15.Press any key to continue.
The installation utility displays the message:
To run ODS, type “cd \imc”,
then type “imc”.
IBM is a registered trademark of
International Business Machines
Corporation
COMPAQ is a registered trademark of
Compaq Computer Corporation
Done...Please remove Disk 1 from the drive.
You see the C:\IMC> prompt.