Configuring dh+ under windows nt t in ods – Rockwell Automation 8520-OM Offline Development System User Manual User Manual
Page 85
Advertising
![background image](/manuals/580420/85/background.png)
7--11
Using ODS Communication Configuration
Publication 8520--UM051A--EN--P -- October 2000
Offline Development Manual (ODS) Software User Manual
Use the following instructions to configure DH+ under Windows NT
via ODS:
1. In your Windows NT application, launch ODS in a DOS shell.
With RSLinx running, follow steps 1 through 4 as described in
Creating a Project (refer to Chapter 5).
2. Select
DH+ Network
as your application type by choosing
<D>
.
3. When the system prompts you for your desired driver type,
RSLinx is selected by default. Choose
<F>
to continue to the next
screen.
4. A list box containing DH+ drivers that are currently configured in
RSLinx appears. Select the name corresponding to your
configured driver.
Configuring DH+ Under
Windows NTt In ODS
Advertising