Rockwell Automation 8520-OM Offline Development System User Manual User Manual
Page 26
Advertising
3--2
Getting Started with ODS
Publication 8520--UM051A--EN--P --July 2000
Offline Development Manual (ODS) Software User Manual
Continue to step 4 on page 3--3.
Using DOS
1. Turn on the computer and boot DOS.
If
IMC
was included as the last record in the AUTOEXEC.BAT
file, ODS starts automatically when you turn on the computer.
2. At the DOS prompt, type:
IMC [ENTER]
If the message
Bad command or filename
appears, this is an
indication that the PATH command in the AUTOEXEC.BAT file
does not contain the directory \IMC.
3. If this is the case, type:
cd \IMC [ENTER] IMC [ENTER]
ODS displays a similar welcome screen.
Advertising