Rockwell Automation 8520-OM Offline Development System User Manual User Manual
Page 93
![background image](/manuals/580420/93/background.png)
7--19
Using ODS Communication Configuration
Publication 8520--UM051A--EN--P -- October 2000
Offline Development Manual (ODS) Software User Manual
21.Under Call Back, select No Call Back, then click OK.
22.Select: Server
→ Start Remote Access Server.
In the Server field, the name of the local computer should already
be present. If not, enter the computer name preceded by two back
slashes (e.g., \\yourcomputername). Click OK to start the
service.
Setting Up the ODS (or Client) Computer
1. Repeat steps 1. through 13. from the previous section.
2. Relog in. Double click the My Computer icon.
3. Double click Dial--up Networking.
•
If you did not previously configure any dial--up Phonebook,
the New Entry Wizard appears.
•
Click Next, and select Plain Text Password
•
Select enter (or Next) through the rest of the selections until
the following screen appears:
4. Click More and Select Edit Entry and Modem Properties.