Rockwell Automation 8520-OM Offline Development System User Manual - Manual (Page 73)

6--10 Using ODS File Management
Publication 8520--UM051A--EN--P -- October 2000
Offline Development Manual (ODS) Software User Manual
Use the Type option to display a file on the ODS screen. Prior to
displaying your file, you must document it using the Documentor
utility. Refer to page 6--8 for more information. To
Type a file:
1. Select [ F1 ] and pull down the F1-File menu.
2. Select the Type... option.
ODS displays the message Display File... and a directory of
files for the active project/application.
3. Select a file to display, or press [ ESC ] to cancel.
•
use the ARROW keys to move the cursor to the selected file,
then press [
ENTER ], or
•
type in the file name, then press [ ENTER ]
ODS displays the first page of the file on the ODS screen.
4. Press the [ PgDn ] key to view the next page(s). Press [ PgUp ] to
view a previous page(s).
5. Press the [ ESC ] key to return to the original menu after viewing
the file.
This is an example page of an AMP document file:
Displaying an ODS File