Rockwell Automation 8520-OM Offline Development System User Manual - Manual (Page 72)

6--9 Using ODS File Management
Publication 8520--UM051A--EN--P -- October 2000
Offline Development Manual (ODS) Software User Manual
Printing Your File
1. Verify that the printer is connected to the computer.
2. Verify that the DOS print spooler was properly invoked when
ODS was started.
3. Select [ F1 ] and pull down the F1-File menu.
4. Select the Print option.
ODS displays the message Print File and a directory of files
for the active project/application.
5. Select the file that you want to print, or press [ ESC ] to cancel.
•
use the ARROW keys to move the cursor to the selected file,
then press [
ENTER ], or
•
type in the file name, then press [ ENTER ]
ODS outputs the file to the printer that is connected to the
computer.
You can perform other ODS operations while printing is in
progress.
To cancel a printing operation that is in progress:
1. Select [ F1 ] and pull down the F1-File menu.
2. Select the Print cancel option.
ODS stops sending data to the printer.
Canceling a Printing
Request