Rockwell Automation 9220-KTCT INSTL.INSTR CONTROLNET ISA/EISA - Manual (Page 20)

ControlNet ISA/EISA Bus Tool Installation Instructions 20
9220-5.1 — November 1996
Connecting Directly to the ControlNet Link
To connect the card directly to a ControlNet link, you connect
the card to taps as shown below.
9220-KTCT
desktop
host
computer
ControlNet link
1786-TPR, -TPS,
-TPYR, or -TPYS
tap
1. Remove and save the taps’ dust caps (located on the straight or
right-angle connectors).
tap on
trunk cable A
dust cap
tap on
trunk cable B
dust cap