Rockwell Automation 2100-GK61 DeviceNet to SCANport - Manual (Page 16)

Publication 2100-UM001B-EN-P – January 2001
1-4 Overview
• COS (Change of State) capability lets you customize this device’s
activity on the network by configuring the adapter to report only
new data.
• Cyclic operation lets you customize the devices’s activity on the
network by configuring the adapter to report its data at specific
intervals.
• Polled operation allows you to customize the device’s activity on
the network to respond only after the scanner sends control data.
• Peer I/O capabilities let the drive’s I/O (logic command,
reference, logic status, feedback and datalinks) be broadcast to or
received from other drives connected via 1203-GU6, 1336-GM6
or 2100-GK61 adapters.
• Software configuration lets you configure the adapter using
RSNetWorx for DeviceNet.
• Faulted Node Recovery lets you change an item, such as a node
address of a device, even when it is faulted on the network.
• User-configurable fault response provides the ability to customize
the adapter’s actions to communication errors.
• A Module Status LED helps to diagnose network, module, and
SCANport product health.
• Monitor and report status of four (4) individual digital inputs.