Rockwell Automation 2100-GK61 DeviceNet to SCANport - Manual (Page 18)

Publication 2100-UM001B-EN-P – January 2001
1-6 Overview
Hardware and Parts
Description 2100-GK61 Module Hardware
Figure 1.4 illustrates and the following table lists the main parts of the
2100-GK61 DeviceNet to SCANport communication module with
Digital Inputs:
Figure 1.4
Parts of the 2100-GK61 Module
Number Part Description
1 Panel mount Attach module to sub-panel through mounting holes.
2 SCANport
Connection Provides a standard SCANport 8-pin circular mini-DIN connector for the
SCANport cable.
3 Digital Input
Connector Allows connection of switched 230Vac, 115Vac, or 24Vdc inputs to module.
The 6-pin plug-in connector (PIN 192 929) is supplied with the module.
4 Bi-Color LEDs Indicate the status of the DeviceNet media channel, of the SCANport con-
nection, and of the module. For more information, refer to Chapter 7, Trou-
bleshooting.
5 DeviceNet Con-
nection Provides a 10-pin Phoenix connector to attach the module to the DeviceNet
network. The 10-pin plug-in connector (PIN 94220605) is supplied with the
module.
6 Input Status LEDs Indicate the ON-OFF status of the digital inputs.
7 SW1 Set to match the digital input voltage applied of 230Vac, 115Vac, or 24Vdc.
1
2
4
5
6
3
7