Rockwell Automation 2100-GK61 DeviceNet to SCANport - Manual (Page 51)

Publication 2100-UM001B-EN-P – January 2001
Configuring a Scanner to Communicate with the Adapter 4-15
use, do one of the following.
Configuring a Scanner
To configure the scanner, you verify its properties, add devices on the
network to its scan list, and determine how the scanner will
communicate (e.g., polling) with each device. Follow these
directions:
Configuring a PLC Scanner
(1771-SDN) to Communicate
with the Adapter The following instructions describe how to configure a PLC scanner
on a DeviceNet network.
For the PLC to recognize your device, you must do the following:
• Configure the PLC scanner.
• Map your adapter to the PLC scanner (1771-SDN).
1. In the Online screen, double-click on the scanner icon. The
1771-SDN Scanner Module properties and configuration screen
appears.
If Using: Refer To:
PLC Scanner (1771-SDN) Configuring a PLC Scanner (1771-SDN) to
Communicate with the Adapter on page 4-15
SLC Scanner (1747-SDN) Configuring an SLC Scanner (1747-SDN) to
Communicate with the Adapter on page 4-23
ControlLogix Scanner (1756-
DNB) Configuring a ControlLogix Scanner (1756-DNB) to
Communicate with the Adapter on page 4-30
RSNetworx for DeviceNet to
edit parameters. Chapter 3, Configuring the DeviceNet to SCANport
Communication Module with Digital Inputs