Rockwell Automation 1901 SyncPro - Manual (Page 20)

3-2 Installation
1901-UM020C-EN-P – June 2013
Arrangements (cont.) Open Frame
The SyncPro components are mounted on a panel, except the
DTAM display module and the illuminated push button for trip
indication and reset function. See Figures 3.2 and 3.3 for
mounting dimensions of the main unit panel, DTAM and 800T
push button. Quick installation within the main controller is
possible with this arrangement.
NOTE: The Data Table Access Module (DTAM) is supplied with a
two-meter cord for connection with the SyncPro processor. Be
sure to mount the DTAM in a suitable location for this connection
to be made. If a longer cord is required, refer to Publication 1747-
ND013 to find the appropriate catalog number.
.38 [10]
.36 [9] dia.
(4) Mounting Holes
Front View Side View
6.12
[155]
18.02 [458]
16.75 [425]
20.00
[508]
18.95
[481]
13.29
[338]
13.75 [349] .63 [16]
Note: Dimensions are in inches [millimeters].
.38 [10]
.36 [9] dia.
(4) Mounting Holes
Front View Side View
6.12
[155]
6.12
[155]
18.02 [458]
16.75 [425]
20.00
[508]
18.95
[481]
13.29
[338]
13.75 [349] .63 [16]
Note: Dimensions are in inches [millimeters].
Figure 3.2 – Mounting Dimensions