Rockwell Automation 8520-OM Offline Development System Software - Manual (Page 25)

3–2 Getting Started with ODS
Publication MCD-5.1 -August 1999
Continue to step 4 on page 3–3.
Using DOS
1. Turn on the computer and boot DOS.
If IMC was included as the last record in the AUTOEXEC.BAT
file, ODS starts automatically when you turn on the computer.
2. At the DOS prompt, type:
IMC [ENTER]
If the message Bad command or filename appears, this is an
indication that the PATH command in the AUTOEXEC.BAT file
does not contain the directory \IMC.
3. If this is the case, type:
cd \IMC [ENTER] IMC [ENTER]
ODS displays a similar welcome screen.