Rockwell Automation 8520-OM Offline Development System Software - Manual (Page 51)

5–10 Using ODS for Project Management
Publication MCD-5.1 -August 1999
If your control type is 9/PC, the following steps must be
completed:
A. Enter the location of the 9/PC host computer in the text box.
The host computer is the location that you will be uploading
and downloading files from. This name should typically be
20 characters or less. “Local” denotes the default location of
your host computer. Once you enter the location, select
[ENTER] .
B. By default, CNC_1 will appear in the box as the 9/PC topic
name. This is the name of your selected CNC. If this topic
name is incorrect, enter a new name in the text box.
ODS displays a box that asks you to enter your name. The
current name is displayed in the box. For example: