Rockwell Automation 8520-OM Offline Development System Software - Manual (Page 49)

5–8 Using ODS for Project Management
Publication MCD-5.1 -August 1999
The Information option displays the following information about
the active project:
• control family • date created
• project name • firmware revision level of the control
• developer’s name • comments (2 lines)
This is the information entered when you create the project.
Use this procedure to display project information:
1. Press [ F2 ] and pull down the F2-Project menu.
2. Select the Information option.
ODS displays the information for the active project. For
example:
3. Press any key to clear the information display and return to the
top-level menu bar.
Displaying Project
Information