Rockwell Automation 8520-OM Offline Development System Software User Manual
Page 94
Advertising
7–20
Using ODS Communication Configuration
Publication MCD-5.1 -August 1999
5. Click Configure next to Dial using:.
6. Select a baud rate that is available on this and the server PC.
7. Click OK on this and the Edit Phonebook Entry windows.
8. Disconnect your EtherNet cable.
9. Start the RAS server on the 9/PC Host (server PC) if you did not
already do so in the last section:
A. Click the Windows NT Start button and select Settings.
B. Select Control Panel.
Advertising