Rockwell Automation 8520-OM Offline Development System Software - Manual (Page 41)

4–6 Configuring ODS
Publication MCD-5.1 -August 1999
Use the following procedure to enter the DOS shell and execute
DOS commands without exiting ODS.
1. Select [ F5 ] and pull down the F5-Configuration menu.
2. Select the Enter DOS Shell option.
The ODS screen disappears, and this prompt appears:
O.D.S. - Type EXIT to quit>
When this prompt appears, DOS commands can be entered and
executed.
3. To return to ODS, type:
EXIT
4. Press [ENTER] .
The ODS screen reappears.
Chapter 5 tells you how to use the ODS software for project
management.
END OF CHAPTER
Executing DOS
Commands from within
ODS
What to Do Next