Rockwell Automation 8520-OM Offline Development System Software - Manual (Page 32)

3–9 Getting Started with ODS
Publication MCD-5.1 -August 1999
Figure 3.2
Project Organization
PROJECT
DIRECTORY
NAME
PROJECT
TYPE
CONTOL
FIRMWARE
CONTROL
REVISION
NAME
INTEGRATORS
IDATE
AND
DESCRIPTION
COMMENTS
MODE
COMMUNICATION
You can create a project directory for each motion
controller/machine system. This lets you use ODS on many different
motion controller and machine applications.
The F2-Project pull-down menu is used to manage project
directories. You can:
• log general information • rename projects
• create new projects • delete projects
• select existing projects • back up projects to floppy disk
• copy projects • restore projects from floppy disk
Chapter 5 describes the functions of the F2-Project menu.
Application
Use the F3-Application pull-down menu to select the application that
you need for your project (as shown in Figure 3.3 using a 9/Series
ODS package).