Rockwell Automation 1786-series ControlNet Fiber Media Planning and Installation Guide User Manual
Rockwell Automation Equipment
Advertising
Table of contents
Document Outline
- ControlNet Fiber Media Planning and Installation Guide
- Summary of Changes
- Table of Contents
- Preface
- 1 - Get Started with the ControlNet Network Fiber Media System
- Why Choose a Fiber-optic Media System?
- Analyze Your Network
- Identify Fiber Media Components
- Determine Network Topology
- Plan the Installation of the Fiber Media Components
- Choose the Fiber Media System Composition
- Configure the Media in RSNetWorx for ControlNet Software
- Terminate Your Fiber Cable
- Test Your Fiber Media Connections and Segments
- Power Your Repeaters
- Verify Your Network
- 2 - Topology and Signal Considerations
- 3 - Guidelines for Fiber-optic Installation
- 4 - Terminate Your Fiber-optic Cable
- 5 - Verify Your Network
- A - Install Your Fiber Repeater Modules and Repeater Adapters
- B - Status Indicators
- Glossary
- Index
- Back Cover