Rockwell Automation 1786-series ControlNet Fiber Media Planning and Installation Guide - Manual (Page 69)

Rockwell Automation Publication CNET-IN001C-EN-P - October 2011 69
Install Your Fiber Repeater Modules and Repeater Adapters Appendix A
5. Connect the repeater adapter module to the ControlNet network by
connecting the drop line of the coax tap to the BNC connector.
6. Terminate any unused coax ports by connecting a 75
Ω
terminator to the
unused BNC connector.
One 75
Ω
terminator is shipped with the repeater adapter module.
Troubleshoot the Module Use the channel 1 or channel 2 status indicators to check module status and
troubleshoot the module.
For status indicator descriptions, see page 73 .
31459-M
BNC Connector