Rockwell Automation 1440-VAD02-01RA XM-123 Aeroderivative Module - Manual (Page 111)

Publication GMSI10-UM003D-EN-P - May 2010
103
rate detection instead. This means that the module will determine the network
baud rate by listening for network traffic before attempting to go online.
Services
1 Attributes can only be set while the device is in Program Mode. See the description of the Device Mode Object
for more information.
Assembly Object
(Class ID 04
H
)
The Assembly Object binds attributes of multiple objects to allow data to or
from each object to be sent or received in a single message.
The XM-123 module provides both static and dynamic assemblies.
Class Attribute
Instances
Table C.6 DeviceNet Object Services
Service
Code
Class/Instance Usage Name
0E
h
Class/Instance Get_Attribute_Single
10
h
Instance Set_Attribute_Single
4B
h
Instance Allocate_Master/Slave_Connetion_Set
4C
h
Instance
Release_Group_2_Identifier_Set
1
Table C.7 Assembly Object Class Attributes
Attr ID
Access
Rule
Name Data Type Description Semantics
1 Get Revision UINT Revision of the
implemented object. 2
Table C.8 Assembly Object Instances
Instance Name Type Description
100 Default COS Message Input Alarm and Relay Status values